Origin
Redland, MD
Morning in Redland on Tuesday
Local time
6:49 AM
EDT
Current temp
75°F
Unavailable
Compiled and reviewed by the US Trip Planner planning team at COD Solutions Oy · Last reviewed Apr 21, 2026 · Editorial standards
Drive Time
26m
Distance
14.3 mi
23 km
Drive Score
6/10
Good drive
Same Day?
Yes, doable
Fuel Cost
$2
one way
EV Charging
Unknown
Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.
Redland, MD
Stepan Vrany
Fulton, MD
RDNE Stock project
Redland, MD to Fulton, MD is 14.3 miles and takes about 26 minutes via Muncaster Mill Road and Ednor Road, with a fuel budget near $2 and enough daylight to finish in a day. This short trip stays within Maryland, connecting two points in the Northeast region. Expect a local drive with plenty of turns, making it a straightforward option for a quick commute or a short excursion. With no overnight stay required, this route is best suited for those who need to cover a small distance efficiently.
| Road | Distance | Duration |
|---|---|---|
| Muncaster Mill Road | 4.5 mi | 8m |
| Ednor Road | 3.9 mi | 6m |
| Norbeck Road | 2.8 mi | 4m |
| Lime Kiln Road | 1.9 mi | 3m |
| Browns Bridge Road | 0.8 mi | 1m |
| Layhill Road | 0.5 mi | <1m |
| Redland Road | <0.1 mi | <1m |
Step-by-step road directions between Redland, MD and Fulton, MD.
Start on Redland Road
Turn right onto MD 115
Turn left onto MD 28
Turn left onto MD 182
Continue on Ednor Road
Continue on Browns Bridge Road
Turn right onto Lime Kiln Road
Arrive at destination
3 decision points cluster between mile 0 and 12.4 — GPS handles the exact turns, but know they're coming. Your lane choice matters more than the turn itself.
Turn right onto MD 115 / Muncaster Mill Road
Navigation decision point
Turn left onto MD 28 / Norbeck Road
Lane positioning matters here
Turn right onto Lime Kiln Road
Navigation decision point
Regular Gas
$2.37 one way
$4.74 round trip
| Fuel Type | $/gal | One Way | Round Trip |
|---|---|---|---|
| midgrade | $4.61 | $2.60 | $5.19 |
| premium | $4.93 | $2.77 | $5.55 |
| diesel | $5.61 | $3.16 | $6.31 |
No toll roads detected on this route.
Drive Cost (one way)
Fuel
$2
Estimated CO2 emission: 5 kg one way. Prices: EIA weekly data, 2026-04-13.
Driving Electric?
About $2 in charging · 0 stops · 60% less CO2
| Vehicle Type | kWh | Stops | DC Fast | Home Charge |
|---|---|---|---|---|
| Average EV | 4.3 | 0 | $1.50 | $0.69 |
| Efficient EV | 3.6 | 0 | $1.25 | $0.57 |
| EV Truck/SUV | 5.7 | 0 | $2.00 | $0.92 |
Gas CO2
5 kg
EV CO2
2 kg (60% less)
This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.
DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.
Current conditions at both ends of the drive.
Origin
Morning in Redland on Tuesday
Local time
6:49 AM
EDT
Current temp
75°F
Unavailable
Destination
Morning in Fulton on Tuesday
Local time
6:49 AM
EDT
Current temp
49°F
Unavailable
Time zone
Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.
Temperature spread
A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.
Road read
Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.
Weather data from the National Weather Service. Conditions may change; check closer to your travel date.
This route offers a turn-heavy local drive, with no highway mileage to speak of. You'll navigate primarily on Muncaster Mill Road and Ednor Road, experiencing a continuous series of turns. The longest uninterrupted stretch you'll encounter is 4.5 miles on Muncaster Mill Road, giving you a brief period of consistent travel before more turns appear. The road's personality remains consistent throughout, focusing on local connectivity rather than high-speed travel.
Expect a hands-on drive with frequent turns and local roads rather than long highway stretches. Navigation is very simple - set it and forget it for most of the drive. The trickiest moment comes early in the drive near MD 115 / Muncaster Mill Road.
Very easy - short and simple to drive
Balances navigation complexity with total wheel time.
The drive from Redland, MD to Fulton, MD is easy. At 26m with 0% highway, most drivers will find it relaxed and low-stress.
Where does it get tricky?
The main spots that need attention: near the start (MD 115 / Muncaster Mill Road): Navigation decision point; at 4.5 miles (MD 28 / Norbeck Road): Lane positioning matters here; at 12.4 miles (Lime Kiln Road): Navigation decision point.
Weekend Trip
Doable as a same-day drive at 26m. Total distance: 14.3 miles.
Family Friendly
Moderate complexity with 0 natural rest stops along the way.
Solo Traveler
26m drive, comfortable solo distance.
EV Driver
0 DC fast chargers along the route. Coverage: unknown.
First-Time Driver
Mostly highway driving (0%). Straightforward navigation.
Scenic Drive
Mostly surface roads route profile.
Compiled by the US Trip Planner planning team at COD Solutions Oy from open government datasets — OSRM over OpenStreetMap for geometry, and EIA for fuel prices. See our methodology for refresh cadence and limitations.
Was this helpful?
Thanks for your feedback!
Your tip has been submitted. Thanks!
/500
Recent Tips
·
Explore more options from Redland, MD or browse trips ending in Fulton, MD.
Looking for more statewide routes? Browse MD road trips.