Clinton Township, MI to Chase, MI is 200.3 miles and takes about 3h 50m via US 10 and I-75, with a fuel budget near $31 and enough daylight to finish in a day. This trip stays within Michigan, moving from the Midwest region to another part of the Midwest. It's a straightforward, highway-focused drive, making it a good option for a single-day excursion. You'll spend most of your time on well-maintained highways, so you can expect a relatively smooth journey. This route is best suited for those who prefer to cover ground efficiently.
Trip Pace
Same-day drive is realistic
A same-day return is realistic if you keep stops short.
Break Rhythm
1 planned break
A short stop every 2 to 3 hours is enough for this drive.
Midpoint
100.2 miles from Clinton Township, MI
A natural place for your longest stop of the day
, about 1h 55m into the drive
.
Main Roads
Road
Distance
Duration
US 10
95.3 mi
1h 49m
I 75
84.1 mi
1h 30m
Hall Road
15.8 mi
20m
Cass Avenue
1.6 mi
2m
Romeo Plank Road
1.2 mi
1m
Moravian Drive
1.2 mi
2m
White Oaks Drive
0.2 mi
<1m
3rd Choice Street
<0.1 mi
<1m
Longest stretch:
US 10
— 95.3 mi, about 1h 49m
Turn-by-Turn Driving Directions
Step-by-step road directions between Clinton Township, MI and Chase, MI.
1
Start on Red Oaks Drive
289 ft·17 sec·Red Oaks Drive
2
Turn left onto White Oaks Drive
0.2 mi·55 sec·White Oaks Drive
3
At end of road, turn left onto Moravian Drive
1.2 mi·2 min·Moravian Drive
4
At end of road, turn left onto Cass Avenue
1.6 mi·2 min·Cass Avenue
5
Enter roundabout onto Romeo Plank Road
82 ft·1 sec·Romeo Plank Road
6
Continue on Romeo Plank Road
0.1 mi·11 sec·Romeo Plank Road
7
Enter roundabout onto Romeo Plank Road
90 ft·1 sec·Romeo Plank Road
8
Continue on Romeo Plank Road
1.0 mi·1 min·Romeo Plank Road
9
Turn right onto M 59
501 ft·8 sec·Hall Road
10
Take the exit
259 ft·9 sec
Toward M 59 WestUse the left lane.
11
Merge onto M 59
16 mi·20 min·Hall Road
Use the left lane.
12
Take the exit
0.6 mi·1 min
Exit 40BToward I 75 North: FlintUse the slight right lane.
13
Merge onto I 75
33 mi·35 min·I 75
14
Keep slight left at fork onto I 75
51 mi·54 min·I 75
Toward I 75: Saginaw
15
Take the exit
0.2 mi·35 sec
Exit 162BToward US 10 West: Midland
16
Continue on US 10
11 mi·11 min·US 10
17
Keep slight right at fork onto US 10
38 mi·38 min·US 10
Toward US 10: Clare
18
Take the exit onto US 10
46 mi·1 hr·US 10
Toward US 10 WEST, TO M 115: Ludington, Cadillac
19
Turn right onto 3rd Choice Street
488 ft·21 sec·3rd Choice Street
20
Arrive at destination
3rd Choice Street
Trip Plan
Given the manageable 3h 50m duration, this 200.3-mile trip from Clinton Township to Chase is easily achievable in one day. Aim to depart in the morning to maximize daylight and allow for any unforeseen traffic. With only one recommended stop and a fuel cost estimated at $31, you have flexibility in your timing. Keep an eye on your fuel gauge, especially before embarking on the longest stretch of 95.3 miles on US 10, as services can be more spread out in certain sections. This route is designed for a quick transit, so focus on enjoying the efficient drive.
Morning Departure
An early start around 7-8 AM gets you there with plenty of daylight left.
Evening Departure
A late afternoon start means arriving after dark. Morning is better.
You can normally do this drive in one day.
Plan roughly 1 meaningful break for fuel, food, and rest.
The halfway point lands around 100.2 miles from Clinton Township, MI, or about 1h 55m into the drive.
The longest continuous stretch on this route runs about 95.3 miles.
This is a comfortable same-day trip.
Departure
Before you leave
Start with fuel, water, and navigation already sorted so the first hour feels easy.
First stop
Around 44 miles or 55m in
Use this first pause for coffee, a restroom break, and a quick traffic check ahead.
Halfway reset
Around 100.2 miles or 1h 55m in
This is the best place for your longest stop, a real meal, and a full fuel check.
Final approach
Final hour starts around 3h 3m
Traffic, exits, and arrival timing usually matter more near Chase, MI than in the middle of the route.
Before You Leave
+
Open the route before leaving Clinton Township, MI so your first major turns are already loaded.
+
Leave with enough water and a charging cable within reach, not packed away.
+
Check your fuel range against the first long segment, especially if you are starting outside city service areas.
Day 1
Settle into the route from Clinton Township, MI
This is one driving day of about 200.3 miles and 3h 50m.
Your first comfortable stop window is around 44 miles from Clinton Township, MI.
This route can stay practical as a one-day drive if traffic stays reasonable.
Plan about 1 real break rather than only quick fuel stops.
The longest stretch is on US 10 for about 95.3 miles.
Where to Stop
Rest stops, refuel points, and overnight suggestions along this route.
Place data sourced from public business listings. Hours and availability may vary.
Heads-up: tricky spots
5 of 15
5 decision points cluster between mile 1.4 and 20.1 — GPS handles the exact turns, but know they're coming. Your lane choice matters more than the turn itself.
5
1.4 mi into trip|~3m in|Cass Avenue
At end of road, turn left onto Cass Avenue
Navigation decision point
5
3.2 mi into trip|~6m in|Romeo Plank Road
Enter roundabout onto Romeo Plank Road
Roundabout - know your exit number before entering
7
4.3 mi into trip|~8m in
Take the exit toward M 59 West
Exit ramp - move to the correct lane early. Lane positioning matters here
Use the left lane.
Toward M 59 West
5
4.4 mi into trip|~8m in|M 59 / Hall Road
Merge onto M 59 / Hall Road
Merge point - match speed before joining. Lane positioning matters here
Use the left lane.
7
20.1 mi into trip|~28m in
Take the exit toward I 75 North: Flint
Exit ramp - move to the correct lane early. Lane positioning matters here
Use the slight right lane.
Exit 40B
Toward I 75 North: Flint
Fuel & Cost
Regular Gas
$31.31 one way
$62.63 round trip
$3.97/gal25.4 MPG avg70 kg CO2
Fuel Type
$/gal
One Way
Round Trip
midgrade
$4.36
$34.38
$68.76
premium
$4.89
$38.55
$77.09
diesel
$5.61
$44.22
$88.45
No toll roads detected on this route.
Estimated Trip Cost (one way, 1 person)
Fuel
$31
Meals
$25–$50
Total
$56–$81
Rough estimate based on US averages. Hotel $80–$140/night, meals $25–$50/day.
Estimated CO2 emission: 70.1 kg one way.
Prices: EIA weekly data, 2026-04-13.
Driving Electric?
About $21 in charging
· 0 stops
· 67% less CO2
Vehicle Type
kWh
Stops
DC Fast
Home Charge
Average EV
60.1
0
$21.03
$9.61
Efficient EV
50.1
0
$17.53
$8.01
EV Truck/SUV
80.1
1
$28.04
$12.82
Gas CO2
70 kg
EV CO2
23 kg (67% less)
This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.
DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.
Travel Intel
Current conditions at both ends of the drive.
Forecast as of Apr 16, 2026
Origin
Clinton Township, MI
Late night
in Clinton Township on Sunday
Local time
12:17 AM
EDT
Current temp
73°F
Showers And Thunderstorms
WSW 10 mph85% chanceLive forecast
Flash Flood Warning
Flash Flood Warning issued April 16 at 1:53PM EDT until April 17 at 12:00AM EDT by NWS Gaylord MI
Flood Warning
Flood Warning issued April 16 at 12:16PM CDT by NWS Marquette MI
Destination
Chase, MI
Late night
in Chase on Sunday
Local time
12:17 AM
EDT
Current temp
61°F
Unavailable
Live forecast
Seasonal Notes
Summer travel usually means heavier construction, hotter rest stops, and busier weekend traffic around major cities.
Winter travel shortens daylight, so a route that looks manageable on paper can feel much longer after dark.
Holiday weekends tend to make both departure and arrival windows slower than the raw route time suggests.
Time zone
Same local time
Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.
Temperature spread
12 degrees cooler at arrival
A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.
Road read
3h 50m on the road
The weather snapshot is not static. If you are leaving later, give both cities one more quick forecast check before departure.
Weather data from the National Weather Service. Conditions may change; check closer to your travel date.
More Details
What kind of drive is this?
This drive is predominantly highway-focused, with 90% of the journey taking place on major roads like US 10 and I-75. Expect a consistent pace for most of the trip, especially during the longest stretch of 95.3 miles on US 10. Hall Road also plays a part in connecting you to the main highways. The character is primarily one of efficient travel, minimizing slower local roads. You'll experience the feel of steady highway driving for the bulk of this 200.3-mile route.
90% highway — fuel and pacing are the main things to plan.
20 navigation steps total — most of the decisions cluster near the start and finish.
Longest single stretch: 95.3 mi on US 10.
How Hard Is This Drive?
7/10
This is a straightforward highway drive that stays mostly on US 10 and I 75. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 1.4 miles in near Cass Avenue.
Driving Effort7/10
Demanding - plan breaks and stay ahead of the key maneuvers
Balances navigation complexity with total wheel time.
This is a demanding drive. With 15 significant decision points across 200.3 miles, you will need to stay alert - especially through interchange areas and urban stretches. Consider splitting it into segments if you are not comfortable with fast highway navigation.
Where does it get tricky?
The main spots that need attention: at 1.4 miles (Cass Avenue): Navigation decision point; at 3.2 miles (Romeo Plank Road): Roundabout - know your exit number before entering; at 4.3 miles: Exit ramp - move to the correct lane early. Lane positioning matters here.
Towns Mentioned on Route Signs
Based on OSRM destination-sign hints, not a full list of every settlement the road passes.
Between Clinton Township, MI and Chase, MI, road signs point toward To M 115: Ludington and Cadillac.
To M 115: Ludington
154.2 mi in|~2h 50m|via US 10
Cadillac
154.2 mi in|~2h 50m|via US 10
Who Is This Route For?
Weekend Trip
Doable as a same-day drive at 3h 50m. Total distance: 200.3 miles.
Family Friendly
Moderate complexity with 1 natural rest stops along the way.
Solo Traveler
3h 50m drive, comfortable solo distance.
First-Time Driver
Mostly highway driving (90%). Some complex stretches to watch for.
Frequently Asked Questions
The longest stretch is about 95.3 miles on US 10. The full list of main roads is in the Roads section above.
We did not find dedicated rest areas on this route. For a drive this long, plan bathroom and stretch breaks around gas stations, fast-food stops, or small-town downtowns — check the Nearby Places section for options.
It helps. This route has a higher-than-average number of complex decision points, which get harder in the dark. If the last hour of the trip is on surface roads or mountain grades, aim to arrive at Chase, MI before sunset when you can. Check the Trip Plan for departure windows that land you in daylight.
Only with planning. This is a long drive for kids — consider splitting it into two days rather than pushing through. Plan at least 1 meaningful breaks. Dedicated rest areas are limited, so plan gas or food stops as your bathroom breaks.
The main spots that need attention: at 1.4 miles (Cass Avenue): Navigation decision point; at 3.2 miles (Romeo Plank Road): Roundabout - know your exit number before entering; at 4.3 miles: Exit ramp - move to the correct lane early. Lane positioning matters here.
Possible but tiring. At 3.8 hours each way, an in-and-out day trip would put you behind the wheel for 7.7 hours — manageable with a long break at Chase, MI, but most travelers stay overnight.
