Skip to main content

Trip from Beltsville, MD to Severna Park, MD

Compiled and reviewed by the US Trip Planner planning team at COD Solutions Oy · Last reviewed Apr 19, 2026 · Editorial standards

Drive Time

41m

Distance

25.5 mi

41 km

Drive Score

8/10

Great drive

Same Day?

Yes, doable

Fuel Cost

$4

one way

EV Charging

Good

8 stations

Best Time to Leave

Save up to 10 min
4 AM
0h 38m ★
6 AM
0h 42m
8 AM
0h 48m
10 AM
0h 44m
12 PM
0h 43m
3 PM
0h 44m
5 PM
0h 48m
8 PM
0h 39m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

census designated place in Prince George's County, Maryland, United States

Beltsville, MD

Wikimedia Commons

census-designated place in Anne Arundel County, Maryland, United States

Severna Park, MD

Wikimedia Commons

Trip Overview

The drive from Beltsville, MD to Severna Park, MD covers 25.5 miles and takes about 41m behind the wheel. This route is realistic as a one-day drive if you keep your stops efficient.

The route leans on Patuxent Freeway, Baltimore-Washington Parkway, West Benfield Road for much of the mileage, and the overall profile is mixed highway & surface. The longest uninterrupted segment is about 7.4 miles on Patuxent Freeway. At current regular gas prices, budget about $4.23 one way before food or hotel costs.

Main Roads

Road Distance Duration
Patuxent Freeway 7.4 mi 10m
Baltimore-Washington Parkway 4.6 mi 6m
West Benfield Road 3.7 mi 7m
Powder Mill Road 3.3 mi 5m
Laurel Fort Meade Road 2.2 mi 3m
Veterans Highway 1.4 mi 2m
Evergreen Road 0.8 mi 1m
Robert Crain Highway 0.3 mi <1m
Longest stretch: Patuxent Freeway — 7.4 mi, about 10m

Turn-by-Turn Driving Directions

Step-by-step road directions between Beltsville, MD and Severna Park, MD.

1

Start on MD 212A

3.3 mi · 5 min · Powder Mill Road
2

Take the ramp

0.2 mi · 28 sec
Toward Baltimore, Baltimore Washington International Airport
3

Merge onto Baltimore-Washington Parkway

4.6 mi · 6 min · Baltimore-Washington Parkway
Use the straight / slight right lanes.
4

Take the exit

0.6 mi · 1 min
Toward MD 198 East: Fort Meade Use the slight right lane.
5

Turn straight onto MD 198

2.2 mi · 3 min · Laurel Fort Meade Road
6

Take the ramp

0.3 mi · 28 sec
Toward MD 32 East: Odenton
7

Merge onto MD 32

7.4 mi · 10 min · Patuxent Freeway
Use the straight / slight right lanes.
8

Take the exit

0.3 mi · 42 sec
Toward MD 3 North: Baltimore Use the right lane.
9

Merge onto MD 3

0.3 mi · 31 sec · Robert Crain Highway
10

Take the exit

0.3 mi · 34 sec
Toward Veterans Highway Use the slight right lane.
11

Continue on Veterans Highway

1.4 mi · 2 min · Veterans Highway
12

Turn right onto West Benfield Road

3.7 mi · 7 min · West Benfield Road
13

Turn right onto Evergreen Road

0.8 mi · 1 min · Evergreen Road
14

At end of road, turn right onto MD 648

186 ft · 5 sec · Baltimore Annapolis Boulevard
15

Arrive at destination

MD 648

Heads-up: tricky spots

5 of 11

5 decision points cluster between mile 3.3 and 19.3 — GPS handles the exact turns, but know they're coming. Your lane choice matters more than the turn itself.

5
3.3 mi into trip | ~5m in

Take the ramp toward Baltimore, Baltimore Washington International Airport

Multiple destination signs - pick the right one

Toward Baltimore, Baltimore Washington Internat...
5
3.6 mi into trip | ~6m in | Baltimore-Washington Parkway

Merge onto Baltimore-Washington Parkway

Merge point - match speed before joining. Lane positioning matters here

Use the straight / slight right lanes.
6
8.2 mi into trip | ~12m in

Take the exit toward MD 198 East: Fort Meade

Exit ramp - move to the correct lane early. Lane positioning matters here

Use the slight right lane. Toward MD 198 East: Fort Meade
6
18.6 mi into trip | ~27m in

Take the exit toward MD 3 North: Baltimore

Exit ramp - move to the correct lane early. Lane positioning matters here

Use the right lane. Toward MD 3 North: Baltimore
6
19.3 mi into trip | ~28m in

Take the exit toward Veterans Highway

Exit ramp - move to the correct lane early. Lane positioning matters here

Use the slight right lane. Toward Veterans Highway

Fuel & Cost

Regular Gas

$4.23 one way

$8.46 round trip

$4.21/gal 25.4 MPG avg 9 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.61 $4.63 $9.26
premium $4.93 $4.95 $9.89
diesel $5.61 $5.63 $11.26

No toll roads detected on this route.

Drive Cost (one way)

Fuel

$4

Estimated CO2 emission: 8.9 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $3 in charging · 0 stops · 67% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 7.6 0 $2.68 $1.22
Efficient EV 6.4 0 $2.23 $1.02
EV Truck/SUV 10.2 0 $3.57 $1.63

Gas CO2

9 kg

EV CO2

3 kg (67% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast as of Apr 17, 2026

Origin

Beltsville, MD

Evening in Beltsville on Sunday

Local time

7:26 PM

EDT

Current temp

77°F

Unavailable

Live forecast

Destination

Severna Park, MD

Evening in Severna Park on Sunday

Local time

7:26 PM

EDT

Current temp

73°F

Unavailable

Live forecast

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

4 degrees cooler at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

41m on the road

Use the two city cards together: check the sky where you start, then compare it with the local time and temperature at arrival.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

What kind of drive is this?

25.5 mi in 41m — 47% highway, the rest on surface roads. Biggest road: Patuxent Freeway.

47% highway, the rest on surface roads — varied driving throughout.
15 navigation steps total — most of the decisions cluster near the start and finish.
Longest single stretch: 7.4 mi on Patuxent Freeway.

How Hard Is This Drive?

7/10

This route mixes highway mileage with some local-road sections near the start or finish. This route has several spots where lane changes, forks, or exits need your full attention. The trickiest moment comes around 3.3 miles in.

Driving Effort 7/10

Focused - busy navigation packed into a short drive

Balances navigation complexity with total wheel time.

This is a short but busy drive. With 11 decision points packed into just 25.5 miles, you will need to pay attention to lane changes and exits — but the whole thing is over in 41m.

Where does it get tricky?

The main spots that need attention: at 3.3 miles: Multiple destination signs - pick the right one; at 3.6 miles (Baltimore-Washington Parkway): Merge point - match speed before joining. Lane positioning matters here; at 8.2 miles: Exit ramp - move to the correct lane early. Lane positioning matters here.

Towns Mentioned on Route Signs

Based on OSRM destination-sign hints, not a full list of every settlement the road passes.

Between Beltsville, MD and Severna Park, MD, road signs point toward Baltimore, Baltimore Washington International Airport and Veterans Highway.

Baltimore

3.3 mi in | ~5m

Baltimore Washington International Airport

3.3 mi in | ~5m

Veterans Highway

19.3 mi in | ~28m

About the Cities

Arriving in Severna Park, MD

Full guide →

Severna Park is a town in Anne Arundel County.

City content from Wikivoyage (CC BY-SA 4.0) and Wikidata (CC0).

Who Is This Route For?

Weekend Trip

Doable as a same-day drive at 41m. Total distance: 25.5 miles.

Family Friendly

Moderate complexity with 0 natural rest stops along the way.

Solo Traveler

41m drive, comfortable solo distance.

EV Driver

0 DC fast chargers along the route. Coverage: unknown.

First-Time Driver

Mostly highway driving (47%). Some complex stretches to watch for.

Scenic Drive

Mixed highway & surface route profile with national parks nearby.

Frequently Asked Questions

The longest stretch is about 7.4 miles on Patuxent Freeway. The full list of main roads is in the Roads section above.

Yes — we found about 1 rest area or service plaza within a short detour of the route (from OpenStreetMap). See the Rest Stops tab under Nearby Places for locations and mile markers. Plan to stretch, use the bathroom, and top off fluids every 2–3 hours on longer drives.

It helps. This route has a higher-than-average number of complex decision points, which get harder in the dark. If the last hour of the trip is on surface roads or mountain grades, aim to arrive at Severna Park, MD before sunset when you can. Check the Trip Plan for departure windows that land you in daylight.

Yes. At under 2 hours behind the wheel, this works well for families — plan one quick stop if you have younger kids.

The main spots that need attention: at 3.3 miles: Multiple destination signs - pick the right one; at 3.6 miles (Baltimore-Washington Parkway): Merge point - match speed before joining. Lane positioning matters here; at 8.2 miles: Exit ramp - move to the correct lane early. Lane positioning matters here.

Yes — Chesapeake & Ohio Canal National Historical Park. See the National Parks section for detour distances and tips on detours.

Yes. A round trip is manageable in a single day if you plan a break at Severna Park, MD before heading back.

How this page is built

Compiled by the US Trip Planner planning team at COD Solutions Oy from open government datasets — OSRM over OpenStreetMap for geometry, EIA for fuel prices, and NPS for national parks. See our methodology for refresh cadence and limitations.

Was this helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Explore more options from Beltsville, MD or browse trips ending in Severna Park, MD.

Looking for more statewide routes? Browse MD road trips.