Skip to main content

Trip from Clinton, IN to Ballstown, IN

Compiled and reviewed by the US Trip Planner planning team at COD Solutions Oy · Last reviewed Apr 19, 2026 · Editorial standards

Drive Time

23m

Distance

13.2 mi

21 km

Drive Score

5/10

Practical drive

Same Day?

Yes, doable

Fuel Cost

$2

one way

EV Charging

Unknown

Best Time to Leave

Save up to 6 min
4 AM
0h 22m ★
6 AM
0h 24m
8 AM
0h 28m
10 AM
0h 25m
12 PM
0h 25m
3 PM
0h 25m
5 PM
0h 28m
8 PM
0h 23m

Estimated drive times based on typical traffic patterns. Actual times may vary with weather, construction, and real-time conditions.

Downtown Clinton, IN, IN

Clinton, IN

Mohan Nannapaneni

Downtown Ballstown, IN, IN

Ballstown, IN

Anastasia Shuraeva

Trip Overview

Clinton, IN to Ballstown, IN is 13.2 miles and takes about 23m via SR 48, with a fuel budget near $2 and enough daylight to finish in a day. This quick trip stays within Indiana, moving from the Midwest region to the Midwest region. It's a straightforward drive, mostly on well-maintained state roads, making it an easy choice for a short hop. You'll find this route ideal if you need to cover a small distance efficiently without much fuss. Plan for a very brief journey that requires minimal preparation.

Main Roads

Road Distance Duration
SR 48 8.3 mi 14m
SR 229 4.7 mi 8m
North Spades Road 0.2 mi <1m
Longest stretch: SR 48 — 8.3 mi, about 14m

Turn-by-Turn Driving Directions

Step-by-step road directions between Clinton, IN and Ballstown, IN.

1

Start on North Spades Road

0.2 mi · 54 sec · North Spades Road
2

Turn right onto SR 48

8.3 mi · 14 min · SR 48
3

Turn right onto SR 229

4.7 mi · 8 min · SR 229
4

Arrive at destination

SR 229

Heads-up: tricky spots

2 of 2

2 decision points cluster between mile 0.2 and 8.5 — GPS handles the exact turns, but know they're coming. Your lane choice matters more than the turn itself.

3
0.2 mi into trip | ~0m in | SR 48

Turn right onto SR 48

Navigation decision point

3
8.5 mi into trip | ~15m in | SR 229

Turn right onto SR 229

Navigation decision point

Fuel & Cost

Regular Gas

$2.06 one way

$4.13 round trip

$3.97/gal 25.4 MPG avg 5 kg CO2
Fuel Type $/gal One Way Round Trip
midgrade $4.36 $2.27 $4.53
premium $4.89 $2.54 $5.08
diesel $5.61 $2.91 $5.83

No toll roads detected on this route.

Drive Cost (one way)

Fuel

$2

Estimated CO2 emission: 4.6 kg one way. Prices: EIA weekly data, 2026-04-13.

Driving Electric?

About $1 in charging · 0 stops · 60% less CO2

Vehicle Type kWh Stops DC Fast Home Charge
Average EV 4 0 $1.39 $0.63
Efficient EV 3.3 0 $1.15 $0.53
EV Truck/SUV 5.3 0 $1.85 $0.84

Gas CO2

5 kg

EV CO2

2 kg (60% less)

This trip is well within single-charge range for most EVs. No charging stops needed if you start fully charged.

DC fast charging avg $0.35/kWh. Home charging avg $0.16/kWh. US grid CO2: 0.39 kg/kWh.

Travel Intel

Current conditions at both ends of the drive.

Forecast as of Apr 16, 2026

Origin

Clinton, IN

Morning in Clinton on Sunday

Local time

10:59 AM

EDT

Current temp

52°F

Unavailable

Live forecast

Destination

Ballstown, IN

Morning in Ballstown on Sunday

Local time

10:59 AM

EDT

Current temp

76°F

Chance Rain Showers then Slight Chance Showers And Thunderstorms

SW 10 mph 28% chance Live forecast

Flood Warning

Flood Warning issued April 15 at 10:59PM EDT by NWS Northern Indiana

Flood Warning

Flood Warning issued April 15 at 10:59PM EDT by NWS Northern Indiana

Time zone

Same local time

Origin and destination are on the same clock, so arrival timing is easier to judge at a glance.

Temperature spread

24 degrees warmer at arrival

A meaningful temperature swing is a good cue to rethink layers, water, and how soon you want to arrive.

Road read

23m on the road

The weather snapshot is not static. If you are leaving later, give both cities one more quick forecast check before departure.

Weather data from the National Weather Service. Conditions may change; check closer to your travel date.

What kind of drive is this?

This route is almost entirely highway-focused, with 98% of the drive on paved roads designed for steady travel. You'll experience a consistent driving pace for a significant portion, including an uninterrupted stretch of 8.3 miles on SR 48. Expect smooth sailing for the majority of your trip, as the primary roads like SR 48, SR 229, and North Spades Road are built for efficient transit. The character remains highway-like throughout, offering a predictable and uncomplicated driving experience.

98% highway — fuel and pacing are the main things to plan.
4 navigation steps total — most of the decisions cluster near the start and finish.
Longest single stretch: 8.3 mi on SR 48.

How Hard Is This Drive?

1/10

This is a straightforward highway drive that stays mostly on SR 48 and SR 229. Navigation is very simple - set it and forget it for most of the drive. The trickiest moment comes around 0.2 miles in near SR 48.

Driving Effort 1/10

Very easy - short and simple to drive

Balances navigation complexity with total wheel time.

The drive from Clinton, IN to Ballstown, IN is easy. At 23m with 98% highway, most drivers will find it relaxed and low-stress.

Where does it get tricky?

The main spots that need attention: at 0.2 miles (SR 48): Navigation decision point; at 8.5 miles (SR 229): Navigation decision point.

Who Is This Route For?

Weekend Trip

Doable as a same-day drive at 23m. Total distance: 13.2 miles.

Family Friendly

Moderate complexity with 0 natural rest stops along the way.

Solo Traveler

23m drive, comfortable solo distance.

EV Driver

0 DC fast chargers along the route. Coverage: unknown.

First-Time Driver

Mostly highway driving (98%). Straightforward navigation.

Frequently Asked Questions

The longest stretch is about 8.3 miles on SR 48. The full list of main roads is in the Roads section above.

Yes. At under 2 hours behind the wheel, this works well for families — plan one quick stop if you have younger kids.

The main spots that need attention: at 0.2 miles (SR 48): Navigation decision point; at 8.5 miles (SR 229): Navigation decision point.

Yes. A round trip is manageable in a single day if you plan a break at Ballstown, IN before heading back.

How this page is built

Compiled by the US Trip Planner planning team at COD Solutions Oy from open government datasets — OSRM over OpenStreetMap for geometry, and EIA for fuel prices. See our methodology for refresh cadence and limitations.

Was this helpful?

Thanks for your feedback!

Your tip has been submitted. Thanks!

/500

Explore More

Explore more options from Clinton, IN or browse trips ending in Ballstown, IN.

Looking for more statewide routes? Browse IN road trips.